Safety tips to keep in mind while using aluminium loading ramps

Digga ramps are considered to be the best loading ramps all over the world. Engineered to perfection using the state-of-art technology and designed to meet the stringent requirements, these ramps are capable of helping you move heavy loads from the ground on to trailers or trucks. Irrespective of your requirement, the aluminium loading ramps from Digga are sure to live up to your expectations. However, before you start using these ramps to load or unload vehicles such as cars, bikes and others, there are a few safety precautions that you need to keep in mind. More often than not, accidents that occur when loading ramps are in use are not because of the poor construction, but due to non-adherence of safety requirements. To prevent work related accidents caused due to ramps to a minimum, it is imperative to adhere to these safety tips.

One of the main dangers posed while using Digga ramps is the vehicle slipping backwards. The chances are higher if you are trying to load a rear wheel drive onto the truck or trailer. In such cases, it is advisable to load the vehicle in reverse since the powered wheel moves uphill first and minimizes the chances of accidents. Sliding off the sides of the ramp is another risk that people face when uses these attachments. In order to minimize this risk while using aluminium loading ramps, make sure the surface of the ramp can withstand traction. Never try to load or unload a vehicle using the ramps if its surface is wet since it does not offer the level of support needed to prevent accidents.

Before loading vehicles such as tractors, cars and others onto the trucks, it is important that you securely attach the Digga ramps to the trailers and trucks. This prevents the aluminium loading ramps from moving backwards during the process. Secure all the safety straps and chains in place and run a quick safety inspection before getting started with the process.